| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2 | 36800 lbf |
| WPD | 143.4 mm |
| Aa - Cage-Cone Backface Clearance | 4.8 mm |
| DD | 126 mm |
| R - Cone Backface To Clear Radius3 | 2.540 mm |
| C1 - Dynamic Radial Rating (1 million revolutions)6 | 363000 N |
| Ab - Cage-Cone Frontface Clearance | 3.8 mm |
| B - Cone Width | 45 mm |
| d | 90 mm |
| G1 - Heat Generation Factor (Roller-Raceway) | 180.1 |
| db - Cone Backface Backing Diameter | 108 mm |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1 | 142000 lbf |
| Cone Part Number | X33118M |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)7 | 64000 N |
| C0 - Static Radial Rating | 447000 N |
| Design Units | METRIC |
| Cg - Geometry Factor | 0.0942 |
| G2 - Heat Generation Factor (Rib-Roller End) | 43.2 |
| Cage Type | Stamped Steel |
| Series | 33118M |
| 4HR3065+[146-3000/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | d:100 mm; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:23400 lbf; WPD:143.2 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:46900 N; Cg - Geometry Factor:0.144; G2 - Heat Generation Factor (Rib-Roller End):50.3; DD:130.1 mm; db - Cone Backface |
| 4HR3065T+[175-3000/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Bearing number:15103/15243; C:14,288 mm; r:2 mm; Outer Diameter (mm):61,912; Size (mm):26.157x61.912x19.05; D:61,912 mm; R:0,8 mm; Bore Diameter (mm):26,157; d:26,157 mm; T:19,05 mm; Width (mm):19,05; B:20,638 mm; |
| 3SRS15GM+[44-1000/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | L:600 mm; H1:50 mm; H:180 mm; Bearing number:UCP326; Width (mm):135; Bore Diameter (mm):130; H2:355 mm; L1:195 mm; J:480 mm; Basic static load rating (C0):214 kN; S:54 mm; Basic dynamic load rating (C):229 kN; Weight:72,1 Kg; Inventory:0.0; Product Group:M06110; A:140 mm; Category:Mounted Units & |
| 3SRS15GM[DD,DDHH,SS,SSHH,UU]+[44-1000/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | UNSPSC:31171504; Snap Ring:No; Manufacturer Item Number:16072 MA; Bearing number:16072 MA; Da - max.:525 mm; Keyword String:Ball; Product Group:B00308; Calculation factor f0:16; Bore Diameter (mm):540; Size (mm):540x360x57; d:360 mm; Calculation factor - kr:0.02; Weight / LBS:125.663; Fatigue load l |
| 4HR3065+[146-3000/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Fillet Radius/Chamfer:3 mm; Enclosure:Open; Configuration:Single Row; Da (max):176 mm; Bore Type:Cylindrical Bore; r1:3 mm; Weight:5.920 kg; Limiting Speed - Oil:3,400 rpm; db (min):104 mm; dc (min):117 mm; db (max):111 mm; B:43 mm; ra1 (max):2.5 mm; D:190 mm; Dynamic Load Rating:335,000 N; ra (max) |
| 4HR3065T+[175-3000/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | Grease lub.:4300; C0r:30.7; Outer Race Width:0.63 Inch | 16 Milli; ra max.:1 mm; Manufacturer Name:KOYO; Internal Clearance:C0-Medium; Rolling Element:Ball Bearing; Outside Diameter:5.512 Inch | 140 Mil; Width (mm):16; Basic static load rating (C0):30,7 kN; (Refer.)Mass(kg):0.606; da min.:115 mm; UN |
| 3SRS15GM[DD,DDHH,SS,SSHH,UU]+[44-1000/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Dimension R:0.25 in; Dimension S:3.62 in; Bearing Number:22226; Shaft Size Type:Imperial; C0 - Static Load:212000 lb; Dimension M:2.37 in; Oil Lubrication - T Seal:1500 rpm; Grease Lubrication - M/N Seal:700 rpm; Float:0.083 in; Oil Lubrication - M/N Seal:700 rpm; Pre Install Clearance Max:0.145 mm; |
| 4HR3065T+[175-3000/1]L THK Separated Linear Guide Side Rails Set Model HR | Da:68 mm; Calculation factor (e):0,3; Db:70 mm; T:23,812 mm; a:15,9 mm; Bore Diameter (mm):33,338; Bearing number:2785R/2729; r min.:3,6 mm; Width (mm):25,654; Basic static load rating (C0):92,2 kN; da:46 mm; B:25,654 mm; db:40 mm; Calculation factor (Y0):1,09; Basic dynamic load rating (C):74,1 kN; |