| Shaft Dia., Nominal (d) | 16.0000 |
| Outer Diameter (mm) | 18 |
| Shaft Size (ds) - 16 +0 / -0/027 | 16 +0 / 0/027 |
| Bearing Length, Nominal (B) | 15.000 |
| Bearing number | AST20 1615 |
| Average Clearance (Cd) | 0.0880 |
| Material | Carbon steel shell w |
| Bearing Outside Diameter, Nominal(Do) | 18.000 |
| OD Chamfer Length (Co) | 0.600 |
| Lube Hole Dia. (dl) | 4.000 |
| ID Chamfer Angle (B deg.) | 30 |
| Bearing Outside Diameter Tolerance (Do tol.) | 18.065 / 18.030 |
| Bore Diameter (mm) | 16 |
| Bearing Length Tolerance (B tol.) - +0 / -0.40 | +0 / 0.40 |
| ID Chamfer Length (Ci) | 0.300 |
| Housing Bore Dia. (Dh) - 18 +0.018 / -0 | 18 +0.018 / 0 |
| Bearing Type | straight |
| Wall Thickness (S3) | 0.968 |
| Bearing Bore after Mounting (di) | 16.108 / 16.040 |
| 2SRS15S[SS,SSHH,UU]+[48-900/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | T:169,977 mm; Outer Diameter (mm):559,867; Bearing number:CRD-6113; D:559,867 mm; Bore Diameter (mm):305,003; Size (mm):305.003x559.867x169.; d:305,003 mm; Width (mm):169,977; |
| 2SRS15NC1+[62-900/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Calculation factor - fHC:1; Calculation factor - f2A:1; Da max.:17 mm; Limiting speed for grease lubrication:109000 r/min; B:6 mm; D1:15.7 mm; rb - max.:0.15 mm; Basic static load rating C0:0.6 kN; da min.:10 mm; Calculation factor e:0.68; Calculation factor - Y1:0.92; r3,4 min.:0.15 mm; a:6.5 mm; C |
| 3HR2555T[F(AP-C),F(AP-CF),F(AP-HC)]+[148-2600/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Outer Diameter (mm):106,363; Mass bushing:0.45 kg; c1 min:0,2 mm; B:76,2 mm; Shaft diameter range min.:101.544 mm; d:101,6 mm; Coefficient of friction µ min.:0.03; Permissible sliding velocity v max.:2 m/s; Basic dynamic load rating (C):610 kN; Bore Diameter (mm):101,6; α ±8:20 °; C |
| 2SRS15N+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series | d1:3,4 mm; L:25 mm; d:8 mm; H:5 mm; D:16 mm; h:3,3 mm; Basic dynamic load rating (C):0,27 kN; Outer Diameter (mm):16; Bearing number:KBK 08-PP; D1:32 mm; Weight:0,033 Kg; Bore Diameter (mm):8; G:25 mm; A:24 mm; d2:6,5 mm; |
| 2SRS15NC1+[62-900/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Bore Diameter (mm):60; d:60 mm; Bearing number:NJ2212-E-TVP3+HJ2212; B:28 mm; Outer Diameter (mm):110; Basic dynamic load rating (C):144 kN; Width (mm):28; C:28 mm; Size (mm):60x110x28; r4 min.:1,5 mm; D:110 mm; r1 min.:1,5 mm; F:72 mm; r2 min.:1,5 mm; Weight:1,31 Kg; Basic static load rating (C0):1 |
| 2SRS15N+[62-900/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Size (mm):90x125x35; Basic static load rating (C0):300 kN; M:112,5 mm; d:90 mm; (Grease) Lubrication Speed:1 100 r/min; r min.:1,1 mm; B:35 mm; Outer Diameter (mm):125; Bearing number:SL02-4918; ℓ:1,5 Tolerance h14; D:125 mm; Weight:1,3 Kg; Da:118,5 mm; ra max.:1 mm; Width (mm):35; C:35 mm; Basic dy |
| 3HR2555T[F(AP-C),F(AP-CF),F(AP-HC)]+[148-2600/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | r2 min.:1,5 mm; Da(max):59.5; Weight:0,332 Kg; e:0.55; D:68 mm; db(max):37; da(min):36.5; Bearing number:303/28CR; Cu:7.25; Sb(min):4.5; Basic static load rating (C0):50,2 kN; Db(min):64; da max:37 mm; Size (mm):28x68x19.75; r1(min):1.5; da min.:36,5 mm; Calculation factor (e):0,55; ra max.:1,5 mm; |
| 3HR2555T[F(AP-C),F(AP-CF),F(AP-HC)]+[148-2600/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | D:140 mm; d:65 mm; T:101 mm; Basic dynamic load rating (C):231 kN; D1:68 mm; D2:100 mm; d3:140 mm; Size (mm):65x140x101; Width (mm):101; Outer Diameter (mm):140; (Grease) Lubrication Speed:1100 r/min; Bore Diameter (mm):65; a:23 mm; r1 min.:1 mm; Bearing number:52413; Basic static load rating (C0):4 |