| B | 66.675 mm |
| G2 - Heat Generation Factor (Rib-Roller End) | 336 |
| Db - Cup Backface Backing Diameter | 449.07 mm |
| Cage Type | Stamped Steel |
| Bearing Weight | 31.6 Kg |
| Design Units | Imperial |
| r - Cup Backface To Clear Radius2 | 6.86 mm |
| Ab - Cage-Cone Frontface Clearance | 7.4 mm |
| Da - Cup Frontface Backing Diameter | 457.20 mm |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 42700 lbf |
| Cone Part Number | EE203136 |
| R - Cone Backface To Clear Radius1 | 6.860 mm |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 231000 lbf |
| db - Cone Backface Backing Diameter | 375.92 mm |
| da - Cone Frontface Backing Diameter | 366.01 mm |
| C0 - Static Radial Rating | 398000 lbf |
| K - Factor7 | 1.4 |
| G1 - Heat Generation Factor (Roller-Raceway) | 2140 |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 59900 lbf |
| Cup Part Number | 203190 |
| 2HR4085[F(AP-C),F(AP-CF),F(AP-HC)]+[179-3000/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | f:2,82 mm; B:25 mm; D:130 mm; Basic dynamic load rating (C):66 kN; D2:139,7 mm; Width (mm):25; d:75 mm; b:3,1 mm; Basic static load rating (C0):49,5 kN; Bore Diameter (mm):75; a:4,06 mm; C:25 mm; Outer Diameter (mm):130; Weight:1,21 Kg; r1 min.:1,5 mm; D1:125,22 mm; Size (mm):75x130x25; r2 min.:1,5 |
| 2HR4085T[F(AP-C),F(AP-CF),F(AP-HC)]+[217-3000/1]L[F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Outer Diameter (mm):46; Width (mm):23; D:46 mm; Bearing number:F-55340; d:34 mm; Bore Diameter (mm):34; Size (mm):34x46x23; C:23 mm; |
| 2HR4085T[F(AP-C),F(AP-CF),F(AP-HC)]+[217-3000/1]L THK Separated Linear Guide Side Rails Set Model HR | D:170,000 mm; C:45,000 mm; Bearing number:SX1755LLU; Size (mm):85x170x45; Bore Diameter (mm):85,000; B:45,000 mm; Width (mm):45,000; Outer Diameter (mm):170,000; d:85,000 mm; |
| 2SRS9XGN+[52-900/1]L[H,P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Bore Diameter (mm):28,575; T:24,608 mm; Size (mm):28.575x72.626x24.608; D:72,626 mm; Outer Diameter (mm):72,626; Bearing number:41125/41286; Width (mm):24,608; d:28,575 mm; C:17,462 mm; B:24,257 mm; a:4,1 mm; |
| 2HR4085[F(AP-C),F(AP-CF),F(AP-HC)]+[179-3000/1]L[H,P,SP,UP][F(AP-C),F(AP-CF),F(AP-HC)] THK Separated Linear Guide Side Rails Set Model HR | Basic dynamic load rating (C):3,284 kN; Weight:0,084 Kg; Size (mm):19.05x44.45x12.7; Bearing number:S1635-2RS; B:12,7 mm; Bore Diameter (mm):19,05; C:12,7 mm; d:19,05 mm; Width (mm):12,7; Outer Diameter (mm):44,45; D:44,45 mm; |
| 2SRS9XGN+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Outer Diameter (mm):28; Bearing number:HK202820; Fw:20 mm; Bore Diameter (mm):20; Size (mm):20x28x20; C:20 mm; D:28 mm; Width (mm):20; |
| 2SRS9XGNC1+[52-900/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload Selectable | Dimension H :3-1/4 in; Note:This product line wa; Bolt Size:2 x 5/8; Shaft Size:2.25 in; Dimension J1 :9-5/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Maximum Speed:3940 rpm; Dimension L :11-1/8 in; Cr - Dynamic Load Rating:23118 lbf; Bearing UPC:013992025845; Support Type: |
| 2HR4085T[F(AP-C),F(AP-CF),F(AP-HC)]+[217-3000/1]L[H,P,SP,UP] THK Separated Linear Guide Side Rails Set Model HR | Bore Diameter (mm):40; d:40 mm; Size (mm):40x80x18; Width (mm):18; Angle (α):15 °; B:18 mm; Outer Diameter (mm):80; C:18 mm; D:80 mm; Bearing number:7208UCG/GNP42; |